我们知道找到合适的安全装备对你很重要, 否则你不会访问newbb电子平台安全网站. 对于那些在极端危险环境下工作的人, 哪里容易发生割伤和刺伤, 找到合适的个人防护装备非常重要. 工人害怕接触锋利的刀片、物体和边缘. These type hazards can easily cause 裂伤s, slashes and nicks. 拥有超过 143,000 hand injuries reported in 2015 by the Bureau of Labor Statistics, you cannot afford to be wearing the wrong safety gear, definitely when encountering these hazards.
即使现在有这么多伤, 奥什A still reports that 70% of workers are not wearing protective gloves. 我们知道你不是这些工人之一! 事实上,我们知道你想要佩戴正确的安全装备. 嗯,你找对地方了. newbb电子平台安全 manufactures a complete lineup of high performance cut protection products, 从手套到袖子.
来进一步简化你的生活, we have also designed a tool to help you find the most appropriate cut resistant, 与防穿刺手套一起:
http://htiu.pollencare.net/resources/mobile/search-cut-score
通过使用这个工具, you are one-step toward selecting the right glove with the optimal cut and puncture levels.
The American National Standards Institute’s ANSI/ISEA 105-2016 cut resistance standard uses a nine (9) level scale. This easily helps users identify and zone in on the cut resistant glove and sleeve required for the specific hazard faced. 切割电阻的等级从0到6,000克, 基于断层测力计测试(TDM法), 是什么使刀片在材料上移动. The higher the weight required to cut the materials the higher the cut resistance rating. A higher rating provides the wearer with better protection and cut performance. Be sure to download our PDFs found below, which provides more in-depth knowledge.
Diagram for the ANSI/ISEA testing process with a Tomodynamometer (TDM Method)
Different materials provide different levels of cut protection. The right balance between protection and comfort is key to staying safe on the job and ensuring you will want to wear the gear.
Below is a good general guideline when considering cut resistant materials.
材料 |
减少 电阻 |
磨损 电阻 |
热 电阻 |
灵巧 |
newbb电子平台 Style |
---|---|---|---|---|---|
凯夫拉尔® |
|
|
|
|
9375 |
凯夫拉®/混合钢 |
|
|
|
|
9399 装甲技术 |
Dyneema® 钻石科技 |
|
|
- |
|
9676 |
Dyneema® 钻石技术/钢混合 |
|
|
- |
|
9672年dt5pu |
Alycore® |
|
|
- |
|
PD2905A |
光谱/纤维 玻璃纤维 |
|
|
- |
|
9346D “孟菲斯幸存者” |
Steelcore®二世 合成/钢混合 |
|
|
- |
|
9356 “Steelcore®II” |
关键 | 表演 |
---|---|
|
极端割伤保护 |
|
优秀的 |
|
很好 |
|
好 |
|
平均 |
- | 不推荐 |
The above guide should be used only as a general reference point. Always keep in mind that each technology allows us to manufacturer cut resistant gloves and sleeves, 不防割. You will find a lot more information for the specific cut resistant technologies in each dedicated feature page.
割伤和撕裂的发生率为 8.1事件 每1万名工人. 如果你是一名工人, chances are good that either you or one of your co-workers will be cut at some point. 如果你是雇主, it’s almost guaranteed that you will be shelling out money for lost productivity and health care costs sooner or later. 因此, it only makes sense to provide appropriate 个人防护用品 on the front end, to both protect your workers and to potentially save on indirect costs associated with injury.
Many industries have at least some level of hazard from cuts and 裂伤s, but workers in accommodation and food services, construction, retail trade, manufacturing, utilities 面临较高的割伤和撕裂风险. 见下表.
行业 | 割伤和撕裂病例 | 非致命伤害总数 |
---|---|---|
住宿及食物服务 | 18.2 | 78,560 |
建设 | 17.9 | 79,890 |
零售贸易 | 11.5 | 123,770 |
制造业 | 10.9 | 122,610 |
公用事业公司 | 7.2 | 90,990 |
受伤人数减少的顶级行业
One surprising trend is that cuts and 裂伤s are now more common in the retail trades than in manufacturing, 那里的受伤人数正在上升. Opening boxes and handling box cutters is an application that many workers forget can easily cause dangerous cuts.
也许并不奇怪, food preparation positions claim the #1 spot on the top 20 list of cut and 裂伤 injuries by occupation. By the numbers, food is more dangerous to work with than sheet metal.
以下是薪资降幅最高的前20个职业, 裂伤, 以及穿刺发生率, 根据美国劳工统计局的报告:
占领 | 事故率(每万名工人) | |
---|---|---|
割伤、撕裂和穿刺 | 总发病率 | |
食品准备工人 | 94.5 | 290.8 |
钣金工人 | 86.5 | 289.9 |
安装程序 | 56.8 | 319.5 |
洗碗机 | 53.4 | 145.6 |
建筑工人 | 46.1 | 265.3 |
厨师和厨师长 | 39.5 | 182.7 |
餐饮服务,非餐厅 | 34.5 | 201 |
汽车维修技师和机械师 | 34 | 207.2 |
维修工人,将军 | 31.6 | 262.4 |
手工工人和货运、库存和物料搬运工 | 30.9 | 297.8 |
餐厅和自助餐厅服务员和酒保助手 | 30.3 | 151.4 |
警察和治安巡逻官 | 28.6 | 497.7 |
惩教人员和狱卒 | 28.3 | 420.2 |
焊工,切割机,焊工和钎焊工 | 28.3 | 163.9 |
油漆工、建筑和维修工人 | 28.1 | 235.9 |
厨师、学校和自助餐厅 | 26.2 | 184.9 |
水管工,管道钳工和蒸汽钳工 | 26 | 193.7 |
园林绿化和场地维护工人 | 25.7 | 194.1 |
公共汽车和卡车机械师和柴油发动机专家 | 24.6 | 246 |
Janitors and Cleaners, Except Maids and Housekeeping Cleaners | 20 | 277.4 |
以下是劳工统计局计算总事故率的方法:
We highlighted the primary sources of puncture injuries, applications, events in our 顶级ANSI抗穿刺博客. 减少 injuries occur from many of the same incidents; however, 有一些来源会导致更多的割伤而不是刺穿. 美国劳工统计局的报告如下 2017年主要来源 发生割伤的部位:
建筑工具能很快划破工人的手.
Not listed in our puncture blog, mostly sources of cut injuries:
结构金属一直是切割关注的焦点. 1400K(如图所示)内衬杜邦™凯夫拉尔®.
Below are the top events that cause cuts and 裂伤s in the above occupations:
Any metal object or equipment will quickly lacerate a worker’s hands.
飞机组装 | 处理铝条 | 含油金属零件处理 |
汽车装配 | 处理电缆和电线 | 平板玻璃处理 |
金属的弯曲、压制、冲孔和成型 | 处理模具板 | 电动工具操作-钻头,钉子和螺丝枪 |
地毯刀及安装 | 处理水管阀门 | 精密机械 |
电路板工作 | 重金属冲压 | 印刷和金属处理 |
部件对准和处理 | 暖通空调钣金处理 | 把线 |
切割管道和钣金 | 安装瓷砖 | 剃刀操作 |
切管 | 安装电气箱 | 锐钢搬运 |
刀具操作 | 灯具安装 | 钣金装配 |
去毛刺 | 轻金属组件 | 小零件处理有锋利的边缘 |
精密的金属处理 | 轻金属制造 | 太阳能电池板安装 |
干墙ing | 轻金属装卸 | 分部装配工作 |
电子产品组装 | 轻金属冲压 | 树切割 |
紧固和接线 | 维护修理 | 未修剪件处理 |
渔业及处理鱼类 | 生产家用电器 | 仓库收货/发货 |
食品罐装和装瓶 | 金属天花板框架 | 防水的管道 |
玻璃处理和安装 | 五金冲压 | 窗框安装 |
研磨和锉削 | 金属螺柱框架 | 在锋利的边缘上工作 |
移动金属工件 | 美工刀操作 |
金属板材在上面的列表中排名第二. 我们有一个 整个行业页面 致力于这类工作. Just click the image to learn more about the protection this worker will require.
Learn more about the technologies that fuel the fire behind our industry leading protective gear!
我们使用的抗切割技术是 Alycore, DSM®™Dyneema认为不方便公开, 杜邦™凯夫拉尔®, Spectra fiber,和Steelcore不锈钢外壳. 每种技术都有其独特的优势, designed for keeping you safe across multiple industries and work environments. 其中包括:汽车行业, 建设, 食物制备及加工, 制造业, 金属加工, 五金冲压, 石油 & 气体、回收及废物管理. Each of these industries have applications where different cut resistant technologies are needed and where these technologies perform best, 所以我们才用这么多. 性能最重要的时候, 当你想让保护更进一步的时候, 看看newbb电子平台安全公司的抗切割产品!
Want more info for gash, 裂伤, chop and any other types of cut protection? 查看我们博客上的最新文章.